Roasted Squid Snacks,Argentine Squid Sticks,Illex Squid Zhejiang ocean family co.,ltd , https://www.ocean-family.com
1. Install the biochemical incubator as much as possible in a place where the temperature and humidity change is small. Use a three-prong plug. The socket should be properly grounded.
2. Before starting the biochemical incubator, you should be familiar with and understand the instructions of each component and instrument, and master the correct use method.
3. It is strictly forbidden to contain volatile chemical solvents. Explosive gases and flammable gases are placed in the box. Do not use flammable sprays near the incubator to avoid spark ignition.
4. Always check the airway for leaks.
5. The biochemical incubator has a power-off protection function, so it takes about one and a half minutes to start again after the compressor is stopped, so as to better protect the compressor.
6. The distance between the condenser and the wall of the biochemical incubator should be greater than 100mm, the side of the box should have a gap of 50mm, and the top of the box should have at least 300mm space to ensure good heat dissipation.
7. The biochemical incubator should avoid collision and shaking vibration during handling, maintenance and maintenance. The large inclination of Zui should be less than 45 degrees.
8. Turn off the main power supply and the power switch at the rear of the equipment when you stop using it for a long time. • At the same time, the biochemical incubator should avoid frequent door opening to keep the temperature stable while preventing dust and dirt from entering the work room.
9. The inside and outside of the box should be kept clean every day, and should be cleaned after each use. If you don't need it for a long time, you should always wipe the tank liner and equipment surface to keep it clean and increase the transparency of the glass. Do not use acid, alkali or other corrosive solutions to wipe the outer surface.
10. Turn off the power switch after the end of the culture. If you do not take out the test sample immediately, do not open the door.
Problems to be aware of when working with biochemical incubators
The biochemical incubator has strict and complicated processes in the production process, so in daily use, we must learn how to care for it carefully. Some of the things we operate in the biochemical incubator are taboo, and the improper operation method is firm. operating. The following small series will take you through the issues you need to pay attention to during the operation.